VICTRON ENERGY INVERTER

Victron Energy Inverter

☆☆☆☆☆
(0 customer reviews)
SKU: 4 Category: Tags: ,

In Stock

  • The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.The MultiPlus will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Up to 6 Multis can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check the datasheets to see which models have paralleling, three phase and split phase capabilities.Monitor and control your MultiPlus and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your MultiPlus to setting a Geofence for hire vehicles and more.

    Features and Specifications:

    • Multifunctional, with intelligent power management
    • Two AC Outputs
    • Virtually unlimited power thanks to parallel operation
    • Three phase capability (requires three MultiPlus units)
    • Split phase options
    • PowerControl – Dealing with limited generator, shore side or grid power
    • PowerAssist – Boosting the capacity of shore or generator power
    • Four stage adaptive charger and dual bank battery charging
    • Input voltage range: 19 to 33 Volts DC
    • Output voltage: 120 Volts AC +/- 2% @ 60 Hz
    • Continuous output power (77° F): 3,000 Volt-Amps (VA)
    • Zero load power: 20 Watts; 10 Watts in search mode
    • Charge current (house battery): 70 Amps
    • Charge current (starter battery): 4 Amps
    • Relay switch: Rated for 50 Amps
    • Dimensions: 14.3″ x 10.2″ x 8.6″ inches
    • Weight: 40 pounds
    • 5 year warranty

Description

Specifications
Model 24/3000/70-32 48/3000/35-32 48/5000/70-50
PowerControl & PowerAssist Yes
Transfer switch 32A 32A 50A
Maximum AC input current (no inrush) 32A 32A 50A
Auxiliary output 32A 32A 50A
INVERTER
Input voltage range 19 – 33V 38 – 66V 38 – 66V
Nominal DC current 150A 75A 110A
Nominal Battery voltage 24V 48V
Output Output voltage: 230 VAC ± 2%            Frequency: 50 Hz ± 0,1% (1)
Cont. output power at 25°C (3) 3000VA / 2400W 3000VA / 2400W 5000VA / 4000W
Cont. output power at 45°C 2000W 2000W 3300W
Maximum feed-in power 2470W / 3000VA 2470W / 3000VA 4400W / 5000VA
Nominal current 11A 11A 19A
Max inverter peak fault current 32A  during 1 sec 52A  during 1sec
Power factor range +/- 0.6
Peak power 5500W 5500W 9000W
Maximum efficiency 94% 95% 96%
Zero load power 13W 11W 18W
Zero load power in AES mode 9W 7 W 12W
Zero load power in Search mode 3W 2W 2W
Charger
AC Input 187-250 Vac, 32A, 50/60Hz 187-250Vac, 50A, 50/60Hz
Nominal battery voltage 24V 48V
Charge voltage – Absorption / Float / Storage’ 28.8V / 27.6V / 26.4V 57.6V / 55.2V / 52.8V
Maximum battery charge current (4) 70A 35A 70A
Battery temperature sensor Yes
Programmable (AUX) relay (5) Yes
Protection (2) a-g
VE.Bus communication port For parallel and three phase operation, remote monitoring and system integration
General purpose com. port Yes, 2x
Vibration Class 3M1 for indoor conditional use
Protective class 1
Conditional short circuit current Icc 6kA
Inverter topology Reinforced isolated
Specifications
Interfaces BMS-Can port (VE.Can not supported), USB, Ethernet, VE.Direct, Wi-Fi
Remote on-off Yes
Operating temperature range -20 to +45 °C (fan assisted cooling). Maximum Altitude 2000m
Humidity (non-condensing) max 95%
Enclosure
Material & Color Steel (blue RAL 5012)
Protection category IP21
Pollution degree Pollution degree 2, OVC3
Battery-connection M8 bolts
PV Connection M6 bolts
230 V AC-connection Screw terminals 13 mm2 (6 AWG)
Weight 24/3kVA – 26 kg

48/3kVA – 26 kg

48/5kVA – 38.6 kg
Dimensions (hxwxd) 3kVA – 499 x 268 x 237 mm

5kVA – 604 x 323 x 253 mm
Standards
Safety EN-IEC 60335-1, EN-IEC 60335-2-29 EN-IEC 62109-1, EN-IEC 62109-2
Emission / Immunity EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Anti-islanding See product page
Active anti islanding protection detection method Some sort of frequency shift mechanism

Additional information

Weight 12 kg

About Us

  • Leopards Hill Road, Leopards Hill, Lusaka
  • Mon - Fri : 8:00 AM - 17:00 PM
  • (260) 95 342 5293
Facebook-f Linkedin

Company

About

Solar Installation

Contact Us

Gresse Power Solutions © 2024 Created by Meerkat Studio